# images generated using: # https://github.com/bittorf/kritis-linux #!/bin/sh # generated: Mon Mar 15 10:55:50 UTC 2021 # # BUILDTIME: 3393 sec # DISKSPACE: 2.4G # ARCHITECTURE: armhf / ARCH=arm # COMPILER: CROSS_COMPILE=armv7l-linux-musleabihf- | armv7l-linux-musleabihf-gcc (GCC) 10.2.1 20210227 # CMDLINE_OPTIONS: smoketest_for_release debug 5.10.23 printk procfs sysfs busybox bash dash net wireguard iodine icmptunnel dropbear speedup autoclean debug # # # # KERNEL_VERSION: 5.10.23 # KERNEL_URL: https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.23.tar.xz # KERNEL_CONFIG: /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/.config # # # # Automatically generated file; DO NOT EDIT. # # Linux/arm 5.10.23 Kernel Configuration # # # CONFIG_CC_VERSION_TEXT="armv7l-linux-musleabihf-gcc (GCC) 10.2.1 20210227" # KERNEL_CONFG_TIME: 61 sec ("make vexpress_defconfig" +more) # KERNEL_BUILD_TIME: 2844 sec # KERNEL: /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/arch/arm/boot/zImage # KERNEL_ELF: /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/arch/arm/boot/zImage # KERNEL_SIZE: 6963888 bytes [is really compressed] # KERNEL_ELF: 6963888 bytes # show sections with: readelf -S /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/arch/arm/boot/zImage # # BUSYBOX: /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/busybox/busybox # BUSYBOX_SIZE: 1320432 bytes # BUSYBOX_CONFIG: /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/busybox/.config # # INITRD files......: 16 # symlinks...: 399 # directories: 17 # nodes......: not-implemented-yet # bytes......: 3512281 [100%] # # init: /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs/init (1799 bytes = '/bin/ash' script) # INITRD: 1862913 bytes [53.03%] = /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs.cpio.gz # INITRD2: 1290730 bytes [36.74%] = /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs.cpio.xz # INITRD3: 1292468 bytes [36.79%] = /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs.cpio.xz.xz # INITRD3: 0 bytes [0%] = /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs.cpio.zstd # decompress: gzip -cd /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs.cpio.gz | cpio -idm # # --- # doc | busybox | applied: CONFIG_STATIC=y # doc | linux-5.10.23 | applied: kernel-patch | BEGIN # doc | linux-5.10.23 | applied: kernel-patch in '/home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/opt/linux/linux-5.10.23/scripts/dtc/dtc-lexer.lex.c_shipped' # doc | linux-5.10.23 | applied: kernel-patch in '/home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/opt/linux/linux-5.10.23/./scripts/mkcompile_h' | FAKEID # doc | linux-5.10.23 | applied: kernel-patch | READY # doc | linux-5.10.23 | applied: make ARCH=arm vexpress_defconfig # doc | linux | applied: CONFIG_PCI=y # doc | linux | applied: CONFIG_8139CP=y # doc | linux | applied: CONFIG_TUN=y # doc | linux | applied: CONFIG_NET_FOU=y # doc | linux | applied: CONFIG_CRYPTO_MANAGER=y # doc | linux | applied: CONFIG_WIREGUARD=y # doc | linux | applied: CONFIG_WIREGUARD_DEBUG=y # doc | linux | applied: CONFIG_DEVTMPFS_MOUNT=y # doc | linux | applied: CONFIG_INITRAMFS_SOURCE="/home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/initramfs/essential.txt" # doc | linux | applied: CONFIG_INITRAMFS_COMPRESSION_NONE=y # doc | linux | applied: # CONFIG_RD_GZIP is not set # doc | linux | applied: # CONFIG_RD_BZIP2 is not set # doc | linux | applied: # CONFIG_RD_LZMA is not set # doc | linux | applied: # CONFIG_RD_XZ is not set # doc | linux | applied: # CONFIG_RD_LZO is not set # doc | linux | applied: # CONFIG_RD_LZ4 is not set # doc | linux | applied: # CONFIG_RD_ZSTD is not set # doc | linux | applied: CONFIG_SERIAL_8250=y # doc | linux | applied: CONFIG_SERIAL_8250_CONSOLE=y # doc | linux | applied: # CONFIG_SWAP is not set # doc | linux | not applied: # CONFIG_64BIT is not set # doc | linux | not applied: CONFIG_EARLY_PRINTK=y # see: '/home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/doc.txt' # --- # startup: qemu-system-arm -m 256M -M vexpress-a9 -dtb /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/arch/arm/boot/dts/vexpress-v2p-ca9.dtb \ -kernel /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/arch/arm/boot/zImage \ \ -nographic \ -append "console=ttyAMA0 ip=dhcp nameserver=8.8.8.8" -pidfile "/tmp/tmp.HJDPn1apSP" 00h00m04s | Booting Linux on physical CPU 0x0 00h00m04s | Linux version 5.10.23 (kritis-release@github.com) (compiler/linker unset) #2021-03-15 10:30:54 +0100 SMP f614c58 00h00m04s | CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d 00h00m04s | CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache 00h00m04s | OF: fdt: Machine model: V2P-CA9 00h00m04s | Memory policy: Data cache writeback 00h00m04s | Reserved memory: created DMA memory pool at 0x4c000000, size 8 MiB 00h00m04s | OF: reserved mem: initialized node vram@4c000000, compatible id shared-dma-pool 00h00m04s | cma: Reserved 16 MiB at 0x6f000000 00h00m04s | Zone ranges: 00h00m04s | Normal [mem 0x0000000060000000-0x000000006fffffff] 00h00m04s | Movable zone start for each node 00h00m04s | Early memory node ranges 00h00m04s | node 0: [mem 0x0000000060000000-0x000000006fffffff] 00h00m04s | Initmem setup node 0 [mem 0x0000000060000000-0x000000006fffffff] 00h00m04s | CPU: All CPU(s) started in SVC mode. 00h00m04s | percpu: Embedded 19 pages/cpu s46092 r8192 d23540 u77824 00h00m04s | Built 1 zonelists, mobility grouping on. Total pages: 65024 00h00m04s | Kernel command line: console=ttyAMA0 ip=dhcp nameserver=8.8.8.8 00h00m04s | printk: log_buf_len individual max cpu contribution: 4096 bytes 00h00m04s | printk: log_buf_len total cpu_extra contributions: 12288 bytes 00h00m04s | printk: log_buf_len min size: 16384 bytes 00h00m04s | printk: log_buf_len: 32768 bytes 00h00m04s | printk: early log buf free: 14868(90%) 00h00m04s | Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) 00h00m04s | Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) 00h00m04s | mem auto-init: stack:off, heap alloc:off, heap free:off 00h00m04s | Memory: 227804K/262144K available (8192K kernel code, 599K rwdata, 1816K rodata, 4096K init, 185K bss, 17956K reserved, 16384K cma-reserved) 00h00m04s | SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 00h00m04s | rcu: Hierarchical RCU implementation. 00h00m04s | rcu: RCU event tracing is enabled. 00h00m04s | rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. 00h00m04s | rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 00h00m04s | rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 00h00m04s | NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 00h00m04s | GIC CPU mask not found - kernel will fail to boot. 00h00m04s | GIC CPU mask not found - kernel will fail to boot. 00h00m04s | L2C: platform modifies aux control register: 0x02020000 -> 0x02420000 00h00m04s | L2C: DT/platform modifies aux control register: 0x02020000 -> 0x02420000 00h00m04s | L2C-310 enabling early BRESP for Cortex-A9 00h00m04s | L2C-310 full line of zeros enabled for Cortex-A9 00h00m04s | L2C-310 dynamic clock gating disabled, standby mode disabled 00h00m04s | L2C-310 cache controller enabled, 8 ways, 128 kB 00h00m04s | L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46420001 00h00m04s | random: get_random_bytes called from start_kernel+0x380/0x538 with crng_init=0 00h00m04s | sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns 00h00m04s | clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns 00h00m04s | Failed to initialize '/bus@4000000/motherboard/iofpga@7,00000000/timer@12000': -22 00h00m04s | smp_twd: clock not found -2 00h00m04s | Console: colour dummy device 80x30 00h00m04s | Calibrating local timer... 100.03MHz. 00h00m04s | Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904) 00h00m04s | pid_max: default: 32768 minimum: 301 00h00m04s | Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 00h00m04s | Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 00h00m04s | CPU: Testing write buffer coherency: ok 00h00m04s | CPU0: Spectre v2: using BPIALL workaround 00h00m04s | CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 00h00m04s | Setting up static identity map for 0x60100000 - 0x60100060 00h00m04s | rcu: Hierarchical SRCU implementation. 00h00m04s | smp: Bringing up secondary CPUs ... 00h00m04s | smp: Brought up 1 node, 1 CPU 00h00m04s | SMP: Total of 1 processors activated (511.18 BogoMIPS). 00h00m04s | CPU: All CPU(s) started in SVC mode. 00h00m04s | devtmpfs: initialized 00h00m04s | VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0 00h00m04s | clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 00h00m04s | futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 00h00m04s | NET: Registered protocol family 16 00h00m04s | DMA: preallocated 256 KiB pool for atomic coherent allocations 00h00m04s | cpuidle: using governor ladder 00h00m04s | hw-breakpoint: debug architecture 0x4 unsupported. 00h00m04s | Serial: AMBA PL011 UART driver 00h00m04s | irq: type mismatch, failed to map hwirq-75 for interrupt-controller@1e001000! 00h00m04s | vgaarb: loaded 00h00m04s | SCSI subsystem initialized 00h00m04s | usbcore: registered new interface driver usbfs 00h00m04s | usbcore: registered new interface driver hub 00h00m04s | usbcore: registered new device driver usb 00h00m04s | Advanced Linux Sound Architecture Driver Initialized. 00h00m04s | clocksource: Switched to clocksource arm,sp804 00h00m04s | NET: Registered protocol family 2 00h00m04s | tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) 00h00m04s | TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) 00h00m04s | TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) 00h00m04s | TCP: Hash tables configured (established 2048 bind 2048) 00h00m04s | UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 00h00m04s | UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 00h00m04s | NET: Registered protocol family 1 00h00m04s | RPC: Registered named UNIX socket transport module. 00h00m04s | RPC: Registered udp transport module. 00h00m04s | RPC: Registered tcp transport module. 00h00m04s | RPC: Registered tcp NFSv4.1 backchannel transport module. 00h00m04s | PCI: CLS 0 bytes, default 64 00h00m04s | hw perfevents: enabled with armv7_cortex_a9 PMU driver, 5 counters available 00h00m04s | workingset: timestamp_bits=30 max_order=16 bucket_order=0 00h00m04s | squashfs: version 4.0 (2009/01/31) Phillip Lougher 00h00m04s | jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. 00h00m04s | 9p: Installing v9fs 9p2000 file system support 00h00m04s | io scheduler mq-deadline registered 00h00m04s | io scheduler kyber registered 00h00m04s | Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00h00m04s | sii902x 0-0039: supply iovcc not found, using dummy regulator 00h00m04s | sii902x 0-0039: supply cvcc12 not found, using dummy regulator 00h00m04s | i2c i2c-0: Added multiplexed i2c bus 2 00h00m04s | sii902x 0-0060: supply iovcc not found, using dummy regulator 00h00m04s | sii902x 0-0060: supply cvcc12 not found, using dummy regulator 00h00m04s | physmap-flash 40000000.flash: physmap platform flash device: [mem 0x40000000-0x43ffffff] 00h00m04s | 40000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 00h00m04s | Intel/Sharp Extended Query Table at 0x0031 00h00m04s | Using buffer write method 00h00m04s | physmap-flash 40000000.flash: physmap platform flash device: [mem 0x44000000-0x47ffffff] 00h00m04s | 40000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 00h00m04s | Intel/Sharp Extended Query Table at 0x0031 00h00m04s | Using buffer write method 00h00m04s | Concatenating MTD devices: 00h00m04s | (0): "40000000.flash" 00h00m04s | (1): "40000000.flash" 00h00m04s | into device "40000000.flash" 00h00m04s | physmap-flash 48000000.psram: physmap platform flash device: [mem 0x48000000-0x49ffffff] 00h00m04s | wireguard: allowedips self-tests: pass 00h00m04s | wireguard: nonce counter self-tests: pass 00h00m04s | wireguard: ratelimiter self-tests: pass 00h00m04s | wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. 00h00m04s | wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. 00h00m04s | libphy: Fixed MDIO Bus: probed 00h00m04s | tun: Universal TUN/TAP device driver, 1.6 00h00m04s | libphy: smsc911x-mdio: probed 00h00m04s | smsc911x 4e000000.ethernet eth0: MAC Address: 52:54:00:12:34:56 00h00m04s | isp1760 4f000000.usb: bus width: 32, oc: digital 00h00m04s | isp1760 4f000000.usb: NXP ISP1760 USB Host Controller 00h00m04s | isp1760 4f000000.usb: new USB bus registered, assigned bus number 1 00h00m04s | isp1760 4f000000.usb: Scratch test failed. 00h00m04s | isp1760 4f000000.usb: can't setup: -19 00h00m04s | isp1760 4f000000.usb: USB bus 1 deregistered 00h00m04s | usbcore: registered new interface driver usb-storage 00h00m04s | ledtrig-cpu: registered to indicate activity on CPUs 00h00m04s | usbcore: registered new interface driver usbhid 00h00m04s | usbhid: USB HID core driver 00h00m04s | NET: Registered protocol family 17 00h00m04s | 9pnet: Installing 9P2000 support 00h00m04s | oprofile: using arm/armv7-ca9 00h00m04s | Registering SWP/SWPB emulation handler 00h00m04s | aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 32 00h00m04s | aaci-pl041 10004000.aaci: FIFO 512 entries 00h00m05s | mmci-pl18x 10005000.mmci: Got CD GPIO 00h00m05s | mmci-pl18x 10005000.mmci: Got WP GPIO 00h00m05s | mmci-pl18x 10005000.mmci: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 33,34 (pio) 00h00m05s | 10009000.uart: ttyAMA0 at MMIO 0x10009000 (irq = 37, base_baud = 0) is a PL011 rev1 00h00m05s | printk: console [ttyAMA0] enabled 00h00m05s | 1000a000.uart: ttyAMA1 at MMIO 0x1000a000 (irq = 38, base_baud = 0) is a PL011 rev1 00h00m05s | 1000b000.uart: ttyAMA2 at MMIO 0x1000b000 (irq = 39, base_baud = 0) is a PL011 rev1 00h00m05s | 1000c000.uart: ttyAMA3 at MMIO 0x1000c000 (irq = 40, base_baud = 0) is a PL011 rev1 00h00m05s | rtc-pl031 10017000.rtc: registered as rtc0 00h00m05s | rtc-pl031 10017000.rtc: setting system clock to 2021-03-15T10:55:54 UTC (1615805754) 00h00m05s | drm-clcd-pl111 1001f000.clcd: assigned reserved memory node vram@4c000000 00h00m05s | drm-clcd-pl111 1001f000.clcd: using device-specific reserved memory 00h00m05s | drm-clcd-pl111 1001f000.clcd: core tile graphics present 00h00m05s | drm-clcd-pl111 1001f000.clcd: this device will be deactivated 00h00m05s | drm-clcd-pl111 1001f000.clcd: Versatile Express init failed - -19 00h00m05s | drm-clcd-pl111 10020000.clcd: DVI muxed to daughterboard 1 (core tile) CLCD 00h00m05s | drm-clcd-pl111 10020000.clcd: initializing Versatile Express PL111 00h00m05s | drm-clcd-pl111 10020000.clcd: found bridge on endpoint 0 00h00m05s | drm-clcd-pl111 10020000.clcd: Using non-panel bridge 00h00m05s | input: AT Raw Set 2 keyboard as /devices/platform/bus@4000000/bus@4000000:motherboard/bus@4000000:motherboard:iofpga@7,00000000/10006000.kmi/serio0/input/input0 00h00m05s | [drm] Initialized pl111 1.0.0 20170317 for 10020000.clcd on minor 0 00h00m05s | Console: switching to colour frame buffer device 128x48 00h00m05s | drm-clcd-pl111 10020000.clcd: [drm] fb0: pl111drmfb frame buffer device 00h00m05s | input: ImExPS/2 Generic Explorer Mouse as /devices/platform/bus@4000000/bus@4000000:motherboard/bus@4000000:motherboard:iofpga@7,00000000/10007000.kmi/serio1/input/input2 00h00m05s | Generic PHY 4e000000.ethernet-ffffffff:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=4e000000.ethernet-ffffffff:01, irq=POLL) 00h00m05s | smsc911x 4e000000.ethernet eth0: SMSC911x/921x identified at 0x908b0000, IRQ: 30 00h00m05s | Sending DHCP requests ., OK 00h00m05s | IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 00h00m05s | IP-Config: Complete: 00h00m05s | device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 00h00m05s | host=10.0.2.15, domain=, nis-domain=(none) 00h00m05s | bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= 00h00m05s | nameserver0=10.0.2.3 00h00m05s | ALSA device list: 00h00m05s | #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 32 00h00m05s | Freeing unused kernel memory: 4096K 00h00m05s | Run /init as init process 00h00m06s | ip: RTNETLINK answers: File exists 00h00m06s | # BOOTTIME_SECONDS 4.18 00h00m06s | # MEMFREE_KILOBYTES 231844 00h00m06s | # UNAME Linux 10.0.2.15 5.10.23 #2021-03-15 10:30:54 +0100 SMP f614c58 armv7l GNU/Linux 00h00m06s | # READY - to quit press once CTRL+A and then 'x' or kill qemu # exit with RC:0 # autotest-mode ready after 5 (out of max 20) seconds # see: /home/bastian/software/kritis-linux/minilinux5.10.23_armhf-full/builds/linux/run.sh # # logfile written to: # /home/bastian/software/kritis-linux/log-5.10.23_armhf-full.txt # # proposed name: # (none) # # thanks for using: # https://github.com/bittorf/kritis-linux [OK] autoclean done, build ready after 3402 sec repeat with: CPU=1 DEBUG=true ./minilinux.sh smoketest_for_release armhf 5.10.23